Norway - Trade StandardsNorway - Trade Standards
Overview
Products tested and certified in the United States to U.S. regulations and standards are likely to have to be retested and re-certified to EU/EEA requirements as a result of the different approaches to the protection of the health and safety of consumers and the environment. Where products are not regulated by specific EU technical legislation, they are always subject to the EU’s General Product Safety Directive, as well as to possible additional national requirements.
European Union legislation and standards created under the New Approach are harmonized across the Member States and EEA countries to allow for the free flow of goods. A feature of the New Approach is CE marking.
The concept of New Approach legislation is slowly disappearing as the New Legislative Framework (NLF), which entered into force in January 2010, was put in place to serve as a blueprint for existing and future CE marking legislation. Existing legislation has been reviewed to bring them in line with the NLF concepts, which means that, as of 2016, new requirements are being addressed and new reference numbers are to be used on declarations of conformity. For more information: New Legislative Framework (NLF)
Agricultural Standards
The EEA Agreement does not cover the EU’s single market for agricultural products, nor the EU’s common agricultural policy. Trade in processed agricultural products (such as pizza, yogurt, crispbread and baby food) is regulated by a protocol to the EEA Agreement. A separate agreement on trade in basic agricultural products allows for negotiated quotas for derived products (such as cheese and meats). Even though agriculture is not part of the EEA Agreement and the agricultural sector is not covered by EEA legislation on state aid and competition, this sector is affected by the agreement. EEA food and veterinary legislation, which is largely harmonized with EU legislation, sets requirements for foods and food production, animal health and animal welfare. Food and veterinary legislation, taken together, is often called food law.
The establishment of harmonized EU rules and standards in the food sector has been ongoing for several decades, but it took until January 2002 for the publication of a general food law establishing the general principles of EU food law. This Regulation introduced mandatory traceability throughout the feed and food chain as of January 1, 2005.
For specific information on agricultural standards, please refer to the website of the Foreign Agricultural Service.
There are also export guides to import regulations and standards available on the Foreign Agricultural Service’s website: FAIRS Export Certificate Report
Standards
EU standards setting is a process based on consensus initiated by industry or mandated by the European Commission and carried out by independent standards bodies, acting at the national, European or international level. There is strong encouragement for non-governmental organizations, such as environmental and consumer groups, to actively participate in European standardization.
Many standards in the EU are adopted from international standards bodies such as the International Standards Organization (ISO). The drafting of specific EU standards is handled by three European standards organizations:
- CEN, European Committee for Standardization
- CENELEC, European Committee for Electrotechnical Standardization
- ETSI, European Telecommunications Standards Institute
Mandates - or requests (the Commission requests CEN/CENELEC or ESTI to develop standards) for standards – can be checked online at: http://ec.europa.eu/growth/tools-databases/mandates/index.cfm
Given the EU’s vigorous promotion of its regulatory and standards system, as well as its generous funding for its development, the EU’s standards regime is wide and deep - extending well beyond the EU’s political borders to include EEA countries (and affiliate members (countries which are hopeful of becoming full members in the future) such as the Western Balkan countries among others. Another category, called "companion standardization body" includes the standards organization of Morocco, Israel, Kazakhstan and Australia, among others which are not likely to become a CEN member or affiliate for political and geographical reasons.
To know what CEN and CENELEC have in the pipeline for future standardization, it is best to visit their websites. Other than their respective annual work plans, CEN’s "what we do" page provides an overview of standards activities by subject. Both CEN and CENELEC offer the possibility to search their respective database. ETSI's portal links to ongoing activities.
The European Standardization system and strategy were reviewed in 2011 and 2012. The new standards regulation 1025, adopted in November 2012, clarifies the relationship between regulations and standards and confirms the role of the three European standards bodies in developing harmonized standards (EN)[1]. The emphasis is also on referencing international standards where possible. For information and communication technology (ICT) products, the importance of interoperability standards has been recognized. Through a relatively recent mechanism, a “Platform Committee” reporting to the European Commission will decide which deliverables from fora and consortia might be acceptable for public procurement specifications. The European standards bodies have been encouraged to improve efficiency in terms of delivery and to look for ways to include more societal stakeholders in European standardization. The Joint Initiative on Standardization, launched in 2016 with a number of action items to improve European standardization, involves a large group of stakeholders who are committed to deliver results by 2019.
Key link: Standardization Policy
While harmonization of EU legislation can facilitate access to the EU/EEA market, manufacturers should be aware that regulations (mandatory) and technical standards (voluntary) might also function as barriers to trade if U.S. standards are different from those of the EU/EEA.
Standards Norway
Standards Norway (SN), the Norwegian Electrotechnical Committee (NEK) and the Norwegian Communications Authority (Nkom) are the three standards writing bodies in Norway. Standards Norway is the Norwegian member of CEN and ISO. Standards Norway is responsible for all standardization areas, except for electrotechnical and telecommunications. Standards Norway adopts and publishes some 1,500 new Norsk Standard (Norwegian Standards - NS) annually. NS are adopted by Standards Norway based on nationally required standards, European and international standards: http://www.standard.no/en/
The Norwegian Electrotechnical Committee is the Norwegian member of CENELEC and IEC and is responsible for standardization in the electro technical area. The Norwegian Electrotechnical Committee adopts and publishes some 300 new standards annually.
The Norwegian Communication Authority is the Norwegian national member of ETSI and ITU. The Norwegian Communication Authority is responsible communications standardization in Norway. The major tasks are the co-ordination of international and European work in this area: http://eng.nkom.no/about
Standard Online AS is responsible for marketing and sale of standards and related products in Norway. Standard Online provides information on available standards, and Standards Norway, the Norwegian Electrotechnical Committee and the Norwegian Communications Authority provide information on standardization work in progress.
Key link:
https://www.standard.no/en/toppvalg/about-us/about-standardonline/#.VzBEElVcRBc
As the Norwegian member of ISO, Standards Norway is responsible for marketing and selling ISO standards and publications within Norway. Standard Online AS is doing this on behalf of Standards Norway. Each Norwegian Standard (NS) is adopted by Standards Norway based on either nationally created or European and International Standards. There are currently around 14,000 NS in many different fields. More than 95 % of the standards being adopted today are common European Standards and are designated NS-EN.
Note on Standards in the Offshore Oil Industry
EU/EEA regulations stipulate that suppliers of products and services to the oil industry must be selected with the aid of objective criteria based on a public call for competition in the EU/EEA area. To ensure correct and objective procurement in accordance with these rules, leading Scandinavian oil companies have established a common qualification scheme, called the Achilles Joint Qualification System, for qualification of suppliers of products and services to the oil industry in Norway and abroad. All operators, the main engineering companies, and the suppliers in the industry use this system. Achilles contains information on each company, its QA system, and its services and products. Also, Achilles may be very useful for any new-to-market company since it provides an overview on existing competitors, or even better, it may reveal gaps in a product range that offer an opportunity to the suppliers with the relevant products, tools, or services.
Achilles Information Center website: http://www.achilles.com/en?cont=nb
A Norwegian initiative for reducing development and operation costs for the offshore oil and gas industry has resulted in the NORSOK Standards (Norsk Sokkels Konkurranseposisjon – the competitive standing of the Norwegian offshore sector). The main objective for these standards has been to add value and ensure cost savings for all relevant transaction parties in the industry. NORSOK standards have been widely used by companies on the Norwegian Continental Shelf. NORSOK standards for the Norwegian offshore market are subject to a fee: http://www.standard.no/petroleum
Testing, Inspection and Certification
Conformity Assessment
Conformity Assessment is a mandatory step for the manufacturer in the process of complying with specific EU harmonized legislation. The purpose of conformity assessment is to ensure consistency of compliance during all stages, from design to production, to facilitate acceptance of the final product. EU/EEA product legislation gives manufacturers some choice regarding conformity assessment, depending on the level of risk involved in the use of their product. These range from self-certification, type examination and production quality control system, to full quality assurance system. Conformity assessment bodies in individual Member States are listed in the New Approach Notification and Designated Organizations (NANDO) information system.
Key link: NANDO
To promote market acceptance of the final product, there are a number of voluntary conformity assessment programs. CEN’s certification system is known as the Keymark. Neither CENELEC nor ETSI offer conformity assessment services.
Product Certification
To sell products in the EU market of 28 Member States, as well as in EFTA (Norway, Liechtenstein Iceland, Switzerland) and Turkey, U.S. exporters are required to apply CE marking whenever their product is covered by specific product legislation. CE marking product legislation offers manufacturers a number of choices and requires decisions to determine which safety/health concerns need to be addressed, which conformity assessment module is best suited to the manufacturing process, and whether or not to use EU-wide harmonized standards. The CE marking process is very complex and this section attempts to provide some background and clarification.
Products manufactured to standards adopted by CEN, CENELEC or ETSI, and referenced in the Official Journal as harmonized standards, are presumed to conform to the essential requirements of EU harmonized legislation. The manufacturer then applies the CE marking and issues a declaration of conformity. With these, the product will be allowed to circulate freely within the EU and EFTA. A manufacturer can choose not to use the harmonized EU standards, but then must demonstrate that the product meets the essential safety and performance requirements. Trade barriers occur when design, rather than performance standards are developed by the relevant European standardization organization, and when U.S. companies do not have access to the standardization process through a European presence.
The CE marking addresses itself primarily to the national control authorities of the Member States, and its use simplifies the task of market surveillance of regulated products. As market surveillance was found lacking, the EU adopted the New Legislative Framework, which went into force in 2010. As mentioned before, this framework is like a blueprint for all CE marking legislation, harmonizing definitions, responsibilities, European accreditation and market surveillance.
The CE marking is not intended to include detailed technical information on the product, but there must be enough information to enable the inspector to trace the product back to the manufacturer or the local contact established in the EU. This detailed information should not appear next to the CE marking, but rather on the declaration of conformity (which the manufacturer or authorized agent must be able to provide at any time, together with the product's technical file), or the documents accompanying the product.
Accreditation
Independent test and certification laboratories, known as notified bodies, have been officially accredited by competent national authorities to test and certify to EU requirements.
European Accreditation is an organization representing nationally recognized accreditation bodies.
Membership is open to nationally recognized accreditation bodies in countries in the European geographical area that can demonstrate that they operate an accreditation system compatible to appropriate EN and ISO/IEC standards.
Norwegian Accreditation is the authorized Accreditation Body in Norway. This agency manages the Norwegian accreditation system and serves as the top level in the quality system in Norway. Organizations accredited by Norwegian Accreditation (e.g. laboratories and certification bodies), will in turn control the quality and certify other organizations/businesses. Norwegian Accreditation is a member of:
- ILAC International Labortory Accreditation Cooperation
- LAF The International Accreditation Forum, Inc.
- EA European Accreditation
The Official Journal of the EU is the official publication of the European Union. It is published daily on the Internet and consists of two series covering adopted legislation as well as case law, studies by committees. It also lists the standards reference numbers linked to legislation (Harmonized Standards).
National technical regulations are published on the Commission's website to allow other countries and interested parties to comment.
National Institute of Standards and Technology’s (NIST) Notify U.S. Service
Member countries of the World Trade Organization (WTO) are required under the Agreement on Technical Barriers to Trade (TBT Agreement) to report to the WTO all proposed technical regulations that could affect trade with other Member countries. The Notify U.S. Service is a free, web-based e-mail subscription service that offers an opportunity to review and comment on proposed foreign technical regulations that can affect your access to international markets. Register online at Internet URL: Notify U.S.
Contact Information
U.S. Mission to the EU
Rebecca Balogh, Standards Attaché
Rebecca.Balogh@trade.gov - Tel: 011 (32) 2.811.50.34
Flavie Guerin, Commercial Specialist
Flavie.Guerin@trade.gov - Tel: 011 (32) 2.811.52.76
U.S. Commercial Service - Oslo, Norway
Vidar Keyn, Head of Commercial Section
Vidar.Keyn@trade.gov - Tel: 011 (47) 21 30 88 34
http://export.gov/norway/
National Institute of Standard & Technology
Gordon Gillerman Standards Coordination Office
100 Bureau Dr.
Mail Stop 2100
Gaithersburg, Maryland 20899
Tel: (301) 975-4000
CEN- European Committee for Standardization
Avenue Marnix 17
B – 1000 Brussels, Belgium
Tel: 011 (32) 2.550.08.11
CENELES- European Committee for Electrotechnical Standardization
Avenue Marnix 17
B – 1000 Brussels, Belgium
Tel: 011 (32) 2.519.68.71
ETSI- European Telecommunications Standards Insitute
Route des Lucioles 650
Sophia Antipolis
F-06560 Valbonne France
Tel: 011 (33) 4.92.94.42.00
SBS- Small Business Standards
4, Rue Jacques de Lalaing
B-1040 Brussels
Tel: 011 (32) 2.285.07.27
ANEC- European Association for the Co-ordination of Consumer Representation in Standardization
Avenue de Tervuren 32, Box 27
B – 1040 Brussels, Belgium
Tel: 011 (32) 2.743.24.70
ECOS- European Environmental Citizens Organization for Standardization
Rue d’Edimbourg 26
B – 1050 Brussels, Belgium
Tel: 011 (32) 2.894.46.68
EOTA- European Organization for Technical Assessment
Avenue des Arts 40
B – 1040 Brussels, Belgium
Tel: 011 (32) 2.502.69.00
[1] An EN standard is a standard developed by CEN/CENELEC and ETSI at the request of the EC in order to meet the essential requirements or other provisions of relevant European Union harmonization legislation